How To Attach Aluminum Patio Cover House

Attaching an Aluminum Patio Cover to Your House

An aluminum patio cover is a great way to add shade and protection from the elements to your outdoor living space. But before you can enjoy your new cover, you need to attach it to your house. Here's a step-by-step guide to help you get the job done right.

Materials and tools you'll need:

Aluminum patio cover
Lag bolts
Drill
Socket wrench
Level
Tape measure
Caulk
Caulk gun

Step 1: Choose the location

The first step is to choose the location for your patio cover. You'll want to select a spot that gets plenty of sunlight, but is also protected from the wind. Once you've chosen the location, mark the spot on your house where the cover will be attached.

Step 2: Install the brackets

The next step is to install the brackets that will support the patio cover. The brackets should be placed at the corners of the cover, as well as along the sides and back. Use a level to make sure that the brackets are installed level.

Step 3: Attach the cross beams

Once the brackets are installed, you can attach the cross beams. The cross beams are what will support the roof of the patio cover. Attach the cross beams to the brackets using lag bolts.

Step 4: Install the roof panels

The final step is to install the roof panels. The roof panels are what will cover the top of the patio cover and protect it from the elements. Attach the roof panels to the cross beams using lag bolts.

Step 5: Caulk the joints

Once the patio cover is installed, you should caulk the joints between the roof panels and the brackets. This will help to prevent water from leaking into the cover.

Step 6: Enjoy your new patio cover!

Now that your patio cover is installed, you can enjoy your new outdoor living space. The cover will provide you with shade and protection from the elements, so you can relax and enjoy the outdoors no matter what the weather is.