How To Edge A Raised Paver Patio Pavers With Bricks

How to Edge a Raised Paver Patio with Bricks

Adding a brick edge to a raised paver patio is a great way to enhance its appearance and durability. Here's a step-by-step guide to help you achieve a professional-looking finish:

Materials You'll Need:

Bricks (Paver, Clay, or Concrete)
Mortar Mix
Quikrete (Optional)
Level
Trowel
Edging Tool
Safety Glasses

Step 1: Prepare the Base

Ensure the pavers are set evenly and compacted into place. If necessary, tamp down the base to create a stable foundation.

Step 2: Determine the Brick Layout

Lay out the bricks along the edge of the patio to determine the spacing and pattern. Mark the position of each brick with a chalk line or spray paint.

Step 3: Mix the Mortar

Follow the manufacturer's instructions to mix the mortar. Aim for a consistency similar to peanut butter, thick enough to hold the bricks in place but not too fluid.

Step 4: Apply the Mortar

Using a trowel, spread a layer of mortar along the base of the patio where the bricks will be placed. Adjust the mortar bed as needed to ensure the bricks will be level.

Step 5: Set the Bricks

Carefully place the bricks into the mortar, aligning them with the chalk marks. Gently tap the bricks with a rubber mallet to ensure they are securely seated.

Step 6: Join the Bricks

Spread mortar between the bricks and use a pointing tool or your finger to smooth it out. Create a concave joint to promote water drainage.

Step 7: Level the Bricks

Use a level to check if the bricks are level. If any bricks are uneven, adjust them by tapping or prying.

Step 8: Set the Edge (Optional)

If desired, you can create a more secure edge by pouring Quikrete along the base of the bricks. Smooth the Quikrete with a trowel and allow it to cure.