How Do You Slope A Paver Patio Away From The House

When installing a paver patio, it is important to slope the surface away from the house to prevent water from pooling and damaging the foundation. The ideal slope is 1/4 inch per foot, but you can adjust this depending on the size and location of your patio.

To slope a paver patio away from the house, you will need to excavate the area where the patio will be installed. The depth of the excavation will depend on the thickness of the pavers and the desired slope. Once the area has been excavated, you can begin laying the pavers.

Start by laying the pavers at the lowest point of the patio, near the house. Work your way up the slope, overlapping the pavers slightly as you go. Make sure to use a level to ensure that the pavers are level with each other and that the slope is consistent.

Once the pavers have been laid, you can fill the joints between the pavers with sand or polymeric sand. This will help to lock the pavers in place and prevent them from shifting. You can also seal the pavers to protect them from the elements.

By following these steps, you can create a beautiful and functional paver patio that will last for many years to come.

Tips for Sloping a Paver Patio Away from the House

Here are a few tips for sloping a paver patio away from the house:

Use a level to ensure that the pavers are level with each other and that the slope is consistent.
Overlap the pavers slightly as you work your way up the slope to create a stronger patio.
Fill the joints between the pavers with sand or polymeric sand to lock the pavers in place and prevent them from shifting.
Seal the pavers to protect them from the elements and extend their lifespan.

By following these tips, you can create a beautiful and functional paver patio that will add value to your home and provide you with years of enjoyment.