How To Properly Slope A Paver Patio

A properly sloped paver patio is essential for ensuring proper drainage and preventing water damage to your home and patio. Here are the essential aspects of how to properly slope a paver patio:

### 1. Determine the Slope

The ideal slope for a paver patio is between 1/4 inch and 1/2 inch per foot. This slope will allow water to drain away from your home and prevent it from pooling on the patio.

### 2. Create a Base

The base of your paver patio should be made of compacted gravel or crushed stone. The base should be at least 4 inches thick and should be sloped away from your home.

### 3. Install Edging

Edging will help to keep your pavers in place and prevent them from shifting. Edging can be made of concrete, metal, or plastic.

### 4. Lay the Pavers

Start laying the pavers at the lowest point of the patio and work your way up. Use a rubber mallet to tap the pavers into place. Make sure that the pavers are level and that the joints are tight.

### 5. Fill the Joints

Once the pavers are in place, fill the joints with polymeric sand. Polymeric sand is a type of sand that hardens when it gets wet. This will help to keep the pavers in place and prevent weeds from growing.

### 6. Seal the Patio

Once the joints are filled, seal the patio with a sealer. Sealers will help to protect the pavers from the elements and make them easier to clean.

### 7. Maintain the Patio

To keep your paver patio looking its best, it is important to maintain it regularly. This includes sweeping the patio, removing weeds, and resealing the patio every few years.

### Conclusion

By following these essential aspects, you can ensure that your paver patio is properly sloped and will last for many years to come.