How To Replace Fabric On A Patio Sling Chair Covers

Patio sling chair covers are a great way to protect your furniture from the elements and keep it looking its best. However, over time, the fabric on these covers can become faded, torn, or stained. If this happens, you don't have to replace the entire chair - you can simply replace the fabric. Here's a step-by-step guide on how to do it:

Step 1: Remove the old fabric

To remove the old fabric, start by unzipping the cover. Once the cover is unzipped, carefully pull the old fabric off of the chair frame. Be careful not to tear the fabric, as this will make it more difficult to replace.

Step 2: Clean the chair frame

Once the old fabric is removed, take some time to clean the chair frame. This will help to remove any dirt or debris that could damage the new fabric. You can clean the frame with a mild soap and water solution. Be sure to rinse the frame thoroughly and allow it to dry completely before continuing.

Step 3: Measure the chair frame

To measure the chair frame, start by measuring the width of the frame. Then, measure the height of the frame from the top of the back to the bottom of the seat. Finally, measure the depth of the frame from the front to the back.

Step 4: Purchase new fabric

Once you have the measurements of the chair frame, you can purchase new fabric. When choosing fabric, be sure to select a fabric that is durable and weather-resistant. You may also want to choose a fabric that is easy to clean.

Step 5: Cut the new fabric

To cut the new fabric, start by laying the fabric out on a flat surface. Then, use a measuring tape and a fabric marker to mark the measurements of the chair frame onto the fabric. Once you have marked the measurements, cut out the fabric.

Step 6: Sew the new fabric onto the chair frame

To sew the new fabric onto the chair frame, start by placing the fabric on the frame. Then, use a sewing machine to sew the fabric to the frame. Be sure to use a strong thread and a stitch that is durable. Once the fabric is sewn to the frame, trim any excess fabric.

Step 7: Reattach the cover

To reattach the cover, start by zipping the cover back onto the chair frame. Once the cover is zipped, you can adjust the fabric so that it is taut and wrinkle-free. Finally, tighten the straps or bungee cords on the cover to secure it to the chair frame.

Conclusion

Replacing the fabric on a patio sling chair cover is a relatively simple process that can be completed in a few hours. By following the steps outlined in this guide, you can easily keep your patio furniture looking its best.