Best Way To Power Wash Paver Patio

The Ultimate Guide to Power Washing Paver Patios

A paver patio is a beautiful and functional addition to any home. However, over time, dirt, grime, and algae can accumulate on the pavers, making them look dull and worn. Power washing is an effective way to clean paver patios and restore their original beauty. Here is a step-by-step guide on how to power wash a paver patio:

Gather Your Equipment

Before you start power washing, you will need to gather the following equipment:

Pressure washer with a fan tip nozzle
Detergent specifically designed for pavers
Stiff bristled brush or broom
Garden hose with nozzle
Bucket

Prepare the Area

Before you start power washing, it is important to prepare the area. Remove any furniture, potted plants, or other objects from the patio. Sweep or blow away any loose dirt or debris.

Apply Detergent

Mix the detergent according to the manufacturer's instructions. Apply the detergent to the pavers using a garden sprayer or a brush. Allow the detergent to dwell on the pavers for the amount of time specified by the manufacturer.

Power Wash the Pavers

Begin power washing the pavers at a low pressure setting. Hold the nozzle about 6-12 inches from the surface of the pavers and move it back and forth in a sweeping motion. Gradually increase the pressure as needed to remove the dirt and grime. Be sure to keep the nozzle moving and avoid holding it in one place for too long, as this can damage the pavers.

Rinse the Pavers

Once you have finished power washing the pavers, rinse them thoroughly with a garden hose. Be sure to rinse away all of the detergent and dirt. Allow the pavers to dry completely before replacing any furniture or other objects.

Tips for Power Washing Paver Patios

Use a fan tip nozzle on your pressure washer. This type of nozzle will help to prevent damage to the pavers.
Start with a low pressure setting and gradually increase the pressure as needed.
Hold the nozzle about 6-12 inches from the surface of the pavers.
Move the nozzle back and forth in a sweeping motion.
Avoid holding the nozzle in one place for too long.
Rinse the pavers thoroughly with a garden hose.
Allow the pavers to dry completely before replacing any furniture or other objects.