How To Power Wash Brick Paver Patio

How to Power Wash Brick Paver Patios

Brick paver patios are a beautiful and durable addition to any home. However, over time, they can become dirty and stained. Power washing is a great way to clean brick pavers and restore their original beauty. Here are the steps on how to power wash brick paver patios:

Step 1: Gather your supplies

You will need the following supplies to power wash your brick paver patio:

A pressure washer
A surface cleaner attachment
A hose
A bucket
Dish soap
A broom
A squeegee

Step 2: Prepare the area

Before you start power washing, you need to prepare the area. Remove any furniture or other objects from the patio. Sweep or blow away any loose dirt or debris.

Step 3: Adjust the pressure washer

The pressure of your power washer should be adjusted according to the type of brick pavers you have. For most brick pavers, a pressure of 1,500 to 2,000 psi is sufficient. If you have soft or delicate brick pavers, you may need to use a lower pressure.

Step 4: Attach the surface cleaner

The surface cleaner attachment will help you to clean your brick pavers evenly and efficiently. Attach the surface cleaner to the end of your pressure washer wand.

Step 5: Add dish soap to the bucket

Add a few tablespoons of dish soap to a bucket of water. This will help to loosen the dirt and grime on your brick pavers.

Step 6: Start power washing

Start power washing your brick pavers in an inconspicuous area to make sure that the pressure is correct. Once you are satisfied with the pressure, start power washing the rest of the patio. Hold the surface cleaner about 6 inches from the surface of the pavers and move it back and forth in overlapping strokes.

Step 7: Rinse the patio

Once you have finished power washing the patio, rinse it thoroughly with clean water. Use a hose or a squeegee to remove any remaining soap or dirt.

Step 8: Allow the patio to dry

Allow the patio to dry completely before using it again. This may take several hours or even days, depending on the weather.

Tips for power washing brick paver patios

Here are a few tips for power washing brick paver patios:

Use a wide, fan-shaped nozzle on your surface cleaner. This will help to prevent damage to the brick pavers.
Hold the surface cleaner at a consistent distance from the surface of the pavers. If you hold it too close, you may damage the pavers. If you hold it too far away, you may not remove all of the dirt and grime.
Move the surface cleaner back and forth in overlapping strokes. This will help to ensure that all of the dirt and grime is removed.
Rinse the patio thoroughly with clean water after power washing. This will help to remove any remaining soap or dirt.
Allow the patio to dry completely before using it again. This may take several hours or even days, depending on the weather.

By following these steps, you can power wash your brick paver patio and restore its original beauty. Enjoy your clean and refreshed patio!