How To Pressure Wash Brick Paver Patio

How to Pressure Wash Brick Paver Patio

A brick paver patio is a beautiful and durable addition to any home. However, over time, dirt, grime, and algae can build up on the pavers, making them look dull and faded. Pressure washing is an effective way to clean brick pavers and restore their original appearance.

Here are the steps on how to pressure wash a brick paver patio:

1. Gather Your Materials

You will need the following materials to pressure wash a brick paver patio: * Pressure washer * Surface cleaner attachment * Garden hose * Stiff bristle brush * Bucket of water * Dish soap * Safety goggles * Mask * Gloves

2. Prepare the Area

Before you start pressure washing, you need to prepare the area. Remove any furniture or other objects from the patio. Sweep or blow away any loose dirt or debris.

3. Set Up the Pressure Washer

Attach the surface cleaner attachment to the pressure washer. The surface cleaner attachment is a flat, round disk that spins as it sprays water. This helps to evenly distribute the water pressure and prevents damage to the pavers. Connect the pressure washer to a garden hose and turn on the water. Adjust the pressure setting to low or medium.

4. Start Pressure Washing

Start pressure washing in a corner of the patio and work your way out. Hold the surface cleaner attachment about 12 inches from the pavers and move it back and forth in overlapping strokes. Be careful not to hold the surface cleaner attachment too close to the pavers, as this can damage them.

5. Rinse the Area

Once you have finished pressure washing the entire patio, rinse it thoroughly with clean water. This will remove any remaining dirt or soap residue.

6. Clean the Surface Cleaner Attachment

After you have finished pressure washing, clean the surface cleaner attachment. This will prevent dirt and debris from building up on the attachment and clogging the nozzles.

7. Dry the Patio

Allow the patio to dry completely before using it again. This will help to prevent dirt and grime from sticking to the pavers.

Tips for Pressure Washing Brick Paver Patios

* Use a low or medium pressure setting to avoid damaging the pavers. * Hold the surface cleaner attachment about 12 inches from the pavers. * Move the surface cleaner attachment back and forth in overlapping strokes. * Rinse the area thoroughly with clean water after pressure washing. * Clean the surface cleaner attachment after each use. * Allow the patio to dry completely before using it again.