How To Put Slings On Patio Chairs

How To Put Slings On Patio Chairs Professionally

Patio chairs are a great way to relax and enjoy the outdoors. Slings are what make these chairs so comfortable, and replacing them is a relatively easy task. By following these steps, you can have your patio chairs looking and feeling like new in no time.

Materials You'll Need:

New sling fabric Measuring tape Scissors Staple gun and staples Drill Screws Screwdriver Optional: Thread locker

Step-by-Step Guide:

1. Start by removing the old slings. Most slings are attached with staples or screws. Use a screwdriver to remove the screws, or a staple remover to remove the staples.

2. Once the old slings are removed, measure the length and width of the chair frame. Cut the new sling fabric to the correct size, allowing for a few inches of extra fabric on all sides.

3. Starting at one corner, staple the new sling fabric to the chair frame. Pull the fabric taut as you staple it, and make sure that the fabric is evenly distributed. Continue stapling around the entire perimeter of the chair frame.

4. Once the new slings are attached, trim away any excess fabric. You can use scissors to do this, or you can use a rotary cutter for a cleaner finish.

5. Your patio chairs are now ready to enjoy! Sit back, relax, and enjoy the comfort of your new slings.

Additional Tips:

If you are having trouble stapling the fabric, you can use a drill to make small holes in the fabric before stapling it. This will make it easier to push the staples through the fabric.

If you are using a staple gun, make sure that the staples are long enough to reach through the fabric and into the chair frame. Short staples may not hold the fabric securely.

To prevent the staples from rusting, you can apply a small amount of thread locker to each staple before driving it into the chair frame.

With a little care and attention, your patio chairs can look and feel like new for many years to come.