How To Re Sand Patio Pavers Without Sanding Concrete Floor

Patios are a great way to add outdoor living space to your home. They can be used for entertaining, relaxing, or simply enjoying the outdoors. If your patio is made of pavers, it will eventually need to be re-sanded to keep it looking its best and prevent weeds from growing between the pavers. Here are step-by-step instructions on how to re-sand patio pavers without sanding the concrete floor:

Step 1: Clean the Pavers

The first step is to clean the pavers. This can be done with a power washer or a broom and water. If you are using a power washer, be sure to use a low-pressure setting so you don't damage the pavers. Once the pavers are clean, allow them to dry completely.

Step 2: Remove the Old Sand

The next step is to remove the old sand. This can be done with a shop vacuum or a leaf blower. If you are using a shop vacuum, be sure to use the crevice tool attachment to get into the cracks between the pavers. Once the old sand is removed, the pavers should be clean and dry.

Step 3: Apply the New Sand

The next step is to apply the new sand. Use a polymeric sand that is designed for pavers. Polymeric sand is a type of sand that contains a resin that helps it to bind together and create a strong bond between the pavers. This type of sand is more expensive than regular sand, but it is worth the extra cost because it will last longer and help to prevent weeds from growing between the pavers.

Apply the polymeric sand to the cracks between the pavers, making sure to fill them completely without overfilling. Once the cracks are filled, sweep the excess sand off the pavers.

Step 4: Compact the Sand

The next step is to compact the sand to create a strong bond between the pavers. This can be done with a tamper or a plate compactor. If you are using a tamper, be sure to tamp the sand firmly into the cracks between the pavers. If you are using a plate compactor, be sure to use a low-vibration setting so you don't damage the pavers.

Step 5: Wet the Sand

The next step is to wet the sand to activate the resin in the polymeric sand. This can be done with a hose or a watering can. Be sure to wet the sand thoroughly, but not so much that it becomes muddy.

Step 6: Allow the Sand to Cure

The final step is to allow the sand to cure. This can take several days, depending on the weather. Once the sand is cured, your patio will be looking its best and ready to be used.