How To Re Sand Patio Pavers Without Sanding Themselves Before

How to Refresh Patio Pavers Without Replacing Them

Patio pavers can become discolored, stained, or covered in dirt and grime over time. If your pavers are looking lackluster, you may be wondering how to restore them to their former glory without the hassle and expense of replacing them. The good news is that it is possible to resand patio pavers without sanding them yourself, using a simple and effective method that will leave your pavers looking like new.

Materials You'll Need

Polymeric sand
Broom or brush
Water source and hose
Squeegee or rubber broom
Compaction tool (optional)

Step 1: Sweep and Clean the Pavers

Start by thoroughly sweeping the pavers to remove any loose dirt or debris. You can also use a pressure washer to clean the pavers more deeply, but be sure to use a low setting to avoid damaging them. Allow the pavers to dry completely before proceeding.

Step 2: Apply Polymeric Sand

Polymeric sand is a specially formulated sand that contains a binder that helps it to lock into place between the pavers. Spread the polymeric sand evenly over the surface of the pavers, making sure to fill all the gaps between them. Use a broom or brush to work the sand into the joints.

Step 3: Compact the Sand

Once the sand has been applied, use a compaction tool or a heavy object like a tamper to compress the sand into the joints. This will help to lock it in place and prevent it from being washed away by rain or wind.

Step 4: Wet the Sand

Use a hose or watering can to wet the sand thoroughly. The water will activate the binder in the polymeric sand, causing it to harden and bond with the pavers. Allow the sand to dry completely before walking on the pavers.

Step 5: Squeegee Excess Sand

Once the sand is dry, use a squeegee or rubber broom to remove any excess sand that may have accumulated on the surface of the pavers. This will help to give the pavers a clean and finished look.

Tips for Success

Use a high-quality polymeric sand specifically designed for patio pavers.
Apply the sand on a dry day when there is no rain in the forecast.
Wet the sand thoroughly to activate the binder.
Allow the sand to dry completely before walking on the pavers.
If necessary, repeat the process every few years to maintain the appearance of your pavers.

By following these steps, you can easily resand your patio pavers without sanding them yourself. This simple and effective method will leave your pavers looking like new, without the hassle and expense of replacing them.