How To Replace Plastic Webbing On Patio Chairs And Tables

How to Replace Plastic Webbing on Patio Chairs and Tables

Plastic webbing is a common material used on patio furniture because it is durable and weather-resistant. However, over time, the webbing can become discoloured, torn, or damaged, requiring replacement. Replacing plastic webbing is a relatively easy task that can be completed in a few hours with the right tools and materials.

Materials you'll need:

New plastic webbing
Scissors
Staple gun
Staples
Measuring tape
Hammer
Punch

Instructions:

1. Remove the old webbing

Use the scissors to cut the old webbing away from the frame of the chair or table. Be careful not to cut the frame itself.

2. Measure and cut the new webbing

Measure the distance between the two attachment points on the frame and add 2 inches to that measurement. Cut the new webbing to this length.

3. Attach the webbing to the frame

Place the new webbing over the attachment points on the frame and secure it with the staple gun. Start by stapling the webbing in the centre and then work your way out to the ends.

4. Trim the excess webbing

Once the webbing is attached, use the scissors to trim any excess webbing that is hanging over the edges of the frame.

Tips:

Use a heavy-duty staple gun to ensure that the staples will hold the webbing securely.
If you are replacing the webbing on a chair, make sure to sit in the chair to test the tension of the webbing before you staple it in place.
If you are replacing the webbing on a table, make sure to place a heavy object on the table to weigh it down before you staple the webbing in place.
Use a punch to create holes in the webbing before you staple it to make it easier to staple.

Replacing plastic webbing on patio chairs and tables is a simple task that can be completed in a few hours. By following these instructions, you can restore your patio furniture to its former glory.