How To Replace Plastic Webbing On Patio Chairs And Tables Together

How to Replace Plastic Webbing on Patio Chairs and Tables

Patio furniture endures extensive wear and tear due to constant exposure to the elements. Plastic webbing, a popular material used in outdoor chairs and tables, can become brittle and break over time. Replacing the webbing is a cost-effective way to rejuvenate your patio furniture and extend its lifespan. Here's a step-by-step guide to help you replace plastic webbing on patio chairs and tables:

Materials you'll need:

New plastic webbing
Staple gun
Staples
Wire cutters
Hammer (optional)

Step 1: Remove the old webbing

Carefully remove the old webbing by cutting the staples that secure it to the frame. Wear safety glasses and gloves to protect yourself from sharp edges. Use wire cutters to cut the staples as close to the frame as possible.

Step 2: Clean the frame

Once the old webbing is removed, thoroughly clean the frame to remove any dirt, debris, or old adhesive. Use a damp cloth or brush to gently scrub the frame. Allow the frame to dry completely before continuing.

Step 3: Install the new webbing

Cut the new plastic webbing to the desired length. Start by stapling the webbing to the frame in the center. Then, continue stapling the webbing around the frame, pulling it taut as you go. Ensure that the webbing is evenly spaced and free of wrinkles.

Step 4: Secure the webbing

Once the webbing is stapled in place, use a hammer (if necessary) to drive the staples flush with the frame. This will ensure that the webbing is securely fastened and will not come loose.

Step 5: Trim the excess webbing

Use wire cutters to trim any excess webbing around the edges of the frame. Be careful not to cut the webbing too close to the staples.

Tips:

When choosing new webbing, consider the weight capacity, durability, and fade resistance of the material.
Use a heavy-duty staple gun and galvanized staples to ensure the webbing is securely fastened.
If the webbing is loose after stapling, you can use a heat gun or hair dryer to shrink it slightly.
To prevent moisture from penetrating the webbing, consider applying a water repellent sealant.

Replacing plastic webbing on patio chairs and tables is a relatively simple and inexpensive project that can significantly improve the appearance and functionality of your outdoor furniture. By following these steps and using the appropriate materials, you can restore the comfort and enjoyment of your patio furniture for years to come.