How To Replace Sand In Patio Pavers

Over time, the sand between patio pavers can become compacted, eroded by rain, or blown away by wind. This can cause the pavers to become loose and uneven, which can be a tripping hazard and make your patio look unkempt. Replacing the sand is a relatively easy and inexpensive way to keep your patio looking its best.

To replace the sand in your patio pavers, you will need the following materials:

Polymeric sand
Broom or leaf blower
Water source (such as a hose or watering can)
Tamp
Plate compactor (optional)

Once you have gathered your materials, follow these steps to replace the sand in your patio pavers:

1. Clean the pavers

Sweep or blow away any loose dirt, debris, or old sand from the pavers. You can also use a power washer to clean the pavers, but be sure to rinse them thoroughly afterwards.

2. Apply the new sand

Spread the new polymeric sand over the pavers, making sure to fill all of the joints. Use a broom to work the sand into the joints, and then use a water source to wet the sand. The water will help to activate the polymers in the sand, which will bind the sand together and help to keep it in place.

3. Tamp the sand

Once the sand is wet, use a tamp to tamp it down into the joints. This will help to compact the sand and make it more stable. You can also use a plate compactor to compact the sand, but be sure to use a light setting so that you do not damage the pavers.

4. Rinse the pavers

Once the sand is tamped down, rinse the pavers with clean water. This will help to remove any excess sand and dirt.

5. Allow the sand to dry

Allow the sand to dry completely before walking on the pavers. This will give the polymers time to set and bind the sand together.

Replacing the sand in your patio pavers is a relatively easy and inexpensive way to keep your patio looking its best. By following these steps, you can ensure that your pavers are stable and safe for years to come.