What Is The Proper Slope For A Patio

What Is The Proper Slope For A Patio?

A well-sloped concrete patio allows water to drain away from your house, preventing damage to your foundation and siding. The ideal slope for a concrete patio is 1/4 inch per foot, or a 2% slope. This means that for every foot of length, the patio should be 1/4 inch lower at the end farthest from your house.

For example, if your patio is 10 feet long, the end farthest from your house should be 2.5 inches lower than the end closest to your house. You can use a level to check the slope of your patio. Place the level on the patio and adjust it until the bubble is centered. The slope is correct if the bubble is centered when the level is placed parallel to the length of the patio and perpendicular to the length of the patio.

If your patio is not sloped correctly, you can add or remove concrete to adjust the slope. To add concrete, you will need to mix a batch of concrete and then pour it into the area that needs to be raised. To remove concrete, you will need to use a jackhammer or a concrete saw to break up the concrete and then remove it.

It is important to note that the slope of your patio may need to be adjusted if you live in an area with a lot of rain or snow. In these areas, you may need to increase the slope to ensure that water drains away from your house quickly enough.

Here are some additional tips for sloping a concrete patio:

Start by establishing the lowest point of your patio. This will be the point closest to your house.
Use a level to mark the desired slope on the ground.
Pour the concrete and smooth it out with a trowel.
Check the slope of the concrete with a level before it dries.
Make any necessary adjustments to the slope.
Allow the concrete to dry and cure completely before using your patio.